emtelle logo DE

DUCTS

Duct  Data Centers  Telecoms  Power  Moleplough  Open Trench  

additional product logoOur uPVC & PE ducting solutions are manufactured to industry standards, are available in varying sizes, and include a comprehensive range of accessories and ancillary items such as bends, connectors, spacers, access chambers and building entry accessories and seals. We take pride in offering our customers a complete end to end ducting solution from a single reputable source.
Our solutions meet the following standards: ENATS 12-24 (Power), BSEN 61386 (Telecommunications) , EN1401 (Underground Drainage).
All of our ducts are approved by UK DNO's.

KEY BENEFITS

  1. 1.

    Comprehensive range of sizes in uPVC & PE.
  2. 2.

    Strong, flexible & impact resistant.
  3. 3.

    Specified & used by all major Distribution Network Operators.

KEY FEATURES

  • Comprehensive range of accessories to compliment entire duct range.
  • Ease of installation with integral jointing system, making the product simple to install, therefore ensuring system is installed correctly without fail.
  • Integrated Interference Fit (Push-fit) or Interference Ring-Seal sockets are IP68 rated and supplied as standard on uPVC Duct.
  • Ease of cable placement, with low friction inner surface bespoke long radii bends to meet the requirements of the latest generation cables. This reduces whole system costs as longer cabling distances can be achieved, resulting in reduction in expensive joints.
  • Internal de-burr on all spigot ends of ducts ensures no damage during cable placement, which in turn improves cable lifespan.
  • Comprehensive product range, covering all possible cable requirements and construction techniques.
  • Compression strengths that meets the highest of industry standard requirements.
  • Bespoke print detail to meet client needs.
  • HDPE ducts suitable for Fusion Welding and Electrofusing available.
  • Class 1+ HDPE ducts suitable for HDD installation methods (Horizontal Drilling).
  • Systems are re-useable when cables are replaced or repaired, therefore maximising asset life and reducing further disruptions to the roadways and footways.
  • PE ducts can be used within moleplough installation methods
  • Overcome installation challenges with bespoke duct and bends products, manufactured to individual client requirements.
  • uPVC is an intrinsically low carbon plastic
  • Finished uPVC product contains <40% oil-based material
  • uPVC can incorporate recycled material
  • Less Landfill - At the end of their life our products are widely recycled

Product Map

product map

PRODUCT OVERVIEW

Product overview image

Interference Fit /Push Fit (IF)

  • A push fit socket design which can be assembled by hand
  • Create an IP4X rated connection. Prevents the ingress of fines greater than 1mm.
  • Manufactured to meet BSEN 63186. (450N Compression Strength at 23deg).
Product overview image

Interference Ring Seal (IRS)

  • A tapered socket design with the addition of a ring seal
  • Create an IP68 rated connection. Prevents the ingress of dirt and water Available in sizes 50, 110, 125, 180, 200, 225 & 250mm.
  • Manufactured to meet BSEN 63186. (450N Compression Strength at 23deg).
  • Also available in 1500N version for shallow burial.
Product overview image

Multipath (uPVC)

  • 110mm Primary duct with 4 inner subducts.
  • Sockets fitted with integrated IP57 coupling body. Prevents the ingress of dirt and water to both the main duct and the inner sub ducts.
  • Manufactured to meet BSEN 63186. (450N Compression Strength at 23deg).
Product overview image

Interference Fit /Push Fit (IF)

  • A push fit socket design which can be assembled by hand.
  • Create an IP4X rated connection. Prevents the ingress of fines greater than 1mm.
  • Manufactured to meet industry standards: ENATS-12-24 Class 1/Class 2. (450N Compression Strength at 50/75deg).
Product overview image

Interference Ring Seal (IRS)

  • A tapered socket design with the addition of a ring seal.
  • Create an IP68 rated connection. Prevents the ingress of dirt and water. Available in sizes 50, 110, 125, 180, 200, 225 & 250mm.
  • Manufactured to meet industry standards: ENATS-12-24 Class 1/Class 2. (450N Compression Strength at 50/75deg).
  • Also available in 1500N version for shallow burial.
Product overview image

Conductive Duct (uPVC)

  • Electro-conductive spigot coating enables the isolation of cable faults within the duct system.
  • Available with Interference (Push) Fit Socket or an Interference Ring Seal Socket. (IF or IRS).
  • Duct manufactured to meet industry standards: ENATS 12-24 Class 1 Compression Strength. (450N Compression Strength at 75deg).
Product overview image

Split Duct Repair (Telecom)

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Swept T

  • Used to take domestic supply from main duct run.
  • Steps down 96.5/110mm to 53.9mm.
  • Smooth sweeping exit.
Product overview image

Access Chambers

  • Preformed access chambers - quick installation.
  • No need for concrete backfill.
  • Meets requirements of BS EN124.
Product overview image

Reducers

  • Step down 95.5mm duct to 53.9mm.
  • Provides a smooth transition for the cable.
  • Available in Green & Grey.
Product overview image

Marker Tape

  • Used to mark to location of buried fibre.
  • Alert utility services of the location of buried fibre duct.
  • Shows free Emergency Contact Details.
Product overview image

Termination Box

  • Manufactured from Polypropylene - withstand hot rolled asphalt.
  • Used for terminating tele communications cable.
  • Lid with hinge for easy access.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

DTS

  • Suitable for power cable fault detection (Distributed Temperature Sensing)
  • Supplied in coils for fast deployment
  • Low friction for easy cable placement
Product overview image

C1+HDPE

  • High resistance to compression
  • Suitable for HDD installation (Horizontal Drilling)
  • Available in coils or sticks
Product overview image

Subduct

  • Various lengths available in coil format
  • Can be supplied together on separator drum
  • Low friction liner for easy cable placement
Product overview image

HDPE Duct (Duct 78)

  • 110mm OD duct with high compression strength
  • Supplied in sticks with machined spigots and sockets
  • Suitable for bridge crossing applications

Related Solutions

HDPE SUB DUCTS

Product image

Our HDPE Sub Duct systems range from 18mm to 63mm diameter and provide a flexible duct in continuous lengths of up to 3000m.


DETAILS

MICRODUCTS

Product image

At the heart of the Fibreflow protected microduct system are the individual microducts themselves. We offer three different types of microducts: Thin Wall, Thick Wall and Low Fire Hazard.


DETAILS

FIBREFLOW WEBFLEX

Product image

A flexible and easily accessible direct burial tube bundle suitable for burial using conventional and new trenching technologies.


DETAILS

TUBE BUNDLES

Product image

Our tube bundles are tight protected microducts suitable for installation of fibre units containing between 1 to 24 fibres, as well as 24-144 fibres in Minicables.


DETAILS

Got any questions? Speak to our Solutions Expert

Contact Us

Rob Gasken
Product Design Engineer


Subscribe to our Newsletter